+44 (0) 1618 738 396 Drop us a line
hello@vebropolymers.com Email the team
Argyle House, Wilmslow Drop in to see us

Home > vebrospeed > vebrospeed SL

vebrospeed SL

1.0–2.0 mm

A UV-stable, ultra-fast-curing MMA resin flooring system that can be installed in low temperatures.

Traffic in 1 hour, offers clients a fast return to service

Allows early access to follow-on trades

Excellent chemical and stain resistance

Suitable for installation in temperatures as low as -25°C

thickness

1.0–2.0 mm

FeRFA type

Type 4

temperature resistance

Sustained: 50°C

finish

Smooth, semi-gloss

system design

primer

vebro MMA Primer

0.50 kg/m²

scatter

vebro Natural Quartz

0.30 kg/m²

bodycoat

vebro MMA Flex Binder

0.40 kg/m² (1.0 mm)

0.80 kg/m² (2.0 mm)

vebro MMA Pigment

0.01 kg/m² (1.0 mm)

0.02 kg/m² (2.0 mm)

vebro MMA Filler

0.75 kg/m² (1.0 mm)

1.50 kg/m² (2.0 mm)

sealer

vebro MMA Flex Seal

0.30 kg/m²

technical properties

System Thickness	–	1.0–2.0 mm
FeRFA Type	BS 8204-6	Type 4
Finish	–	Semi-Gloss
Reaction to Fire	EN 13501-1	Cfl-s1
Temperature Resistance	EN 1062-3	Sustained: 50°C
Slip Resistance	BS 7976–2 (4–S Rubber Slider)	Dry: Low Slip Potential >40 Wet: Good slip resistance <40
Water Permeability	Karsten Test	Nil
Impact Strength	EN ISO 6272	10 N/m
Bond Strength	EN 13892-8	> 2.5 N/mm²
Chemical Resistance	–	Resistant to a very wide range of chemicals.
Speed of Cure	–	Light Foot Traffic: 1 hour Full Chemical Cure: 2–3 hours
VOC Content	–	<8 g/l

Please note: The typical physical properties given above are derived from testing in a controlled laboratory environment at 20°C unless otherwise specified. Results derived from testing field applied samples may vary dependent upon site conditions. The slip resistance figures given above are affected by application techniques and prevailing site conditions. Slip resistance can reduce over time due to poor maintenance, general wear or surface contaminants. Good housekeeping practices should be observed. For a full technical profile, please refer to the data sheet for each product in the system design.

standard colours

application suitability

Industrial & manufacturing
Warehousing & logistics
Production & processing
Cold storage

don't see your specific area listed?

We don’t have room to list every area where vebrospeed SL is suitable for installation.

Our team will be happy to discuss your project to ensure the most appropriate solution.

relevant downloads

request a quote

We’d love to work with you on your project. Please complete the details below, and we’ll be in touch with a quote for vebrospeed SL.

need help specifying the right system?

Our Technical Sales team are on hand to offer specification insight, site support and technical insight throughout your resin flooring project.

where in the world?

Not seeing local content?

Vebro Polymers has manufacturing and office headquarters in Manchester, UK and Kuala Lumpur, Malaysia, as well as a number of distribution partners. Please choose your nearest Vebro HQ or distribution location to see local content.