+44 (0) 1618 738 396 Drop us a line
hello@vebropolymers.com Email the team
Argyle House, Wilmslow Drop in to see us

Home > vebrostatic > vebrostatic ESD SL SR (Dissipative)

vebrostatic ESD SL SR (Dissipative)

1.0–2.0 mm

A slip resistant, self-smoothing epoxy system designed to dissipate electrostatic discharge in sensitive areas.

Meets EN 61340-5-1, EN 61340-4-1 & EN 61340-4-5

Prevents fire and explosion risk from electrostatic charge

Excellent resistance to fuels, lubricants, solvents and other chemicals

Easy to clean, non-tainting and non-dusting finish

Positively textured, slip-resistant finish

thickness

1.0–2.0 mm

FeRFA type

Type 5

temperature resistance

finish

Textured, gloss

system design

primer

vebro EP Primer

0.30 kg/m²

copper tape

Self-adhesive copper tape

esd primer

vebro EP ESD Primer

0.08–0.12 kg/m²

coating

vebro EP ESD SL (Dissipative)

1.20 kg/m² (1.0 mm)

2.50 kg/m² (2.0 mm)

broadcast

vebro Conductive Aggregates (04/06)

1.50 kg/m²

sealer

vebro PU ESD Seal (Matt)

0.15 kg/m²

technical properties

System Thickness	–	1.0–2.0 mm
FeRFA Type	BS 8204-6	Type 5
Fire Resistance	EN 13501-1	Bfl-s1
Resistance to Earth	EN 61340-4-5 / EN 1081 / EN 61340-4-1	<100 Volt 10⁶ Ω ≤10⁹ Ω (Rg) < 3.5 × 10⁷ Ω (Rs)
Compressive Strength	EN 196 / ASTM C 109	70 N/mm²
Flexural Strength	EN 196 / ASTM C 109	40 N/mm²
Wear Resistance	EN ISO 5470-1	≤ 80 mg 1000 cycles (Taber Abrader CS10 wheel)
Shore D Hardness	EN ISO 868	82
Slip Resistance	BS 7976-2	Dry: >55 PTV Wet: >50 PTV
Chemical Resistance	–	Resistant to a very wide range of chemicals.
Speed of Cure	–	Light Foot Traffic: 24 hours Full Chemical Cure: 5 days

Please note: The typical physical properties given above are derived from testing in a controlled laboratory environment at 20°C unless otherwise specified. Results derived from testing field applied samples may vary dependent upon site conditions. The slip resistance figures given above are affected by application techniques and prevailing site conditions. Slip resistance can reduce over time due to poor maintenance, general wear or surface contaminants. Good housekeeping practices should be observed. For a full technical profile, please refer to the data sheet for each product in the system design.

standard colours

application suitability

Data centres
Server rooms
Laboratories
Industrial & manufacturing

don't see your specific area listed?

We don’t have room to list every area where vebrostatic ESD SL SR (Dissipative) is suitable for installation.

Our team will be happy to discuss your project to ensure the most appropriate solution.

relevant downloads

A Guide to Slip Resistant Polymer Flooring

request a quote

We’d love to work with you on your project. Please complete the details below, and we’ll be in touch with a quote for vebrostatic ESD SL SR (Dissipative).

need help specifying the right system?

Our Technical Sales team are on hand to offer specification insight, site support and technical insight throughout your resin flooring project.

where in the world?

Not seeing local content?

Vebro Polymers has manufacturing and office headquarters in Manchester, UK and Kuala Lumpur, Malaysia, as well as a number of distribution partners. Please choose your nearest Vebro HQ or distribution location to see local content.