+44 (0) 1618 738 396 Drop us a line
hello@vebropolymers.com Email the team
Argyle House, Wilmslow Drop in to see us

Home > vebrores > vebrores EP Mortar

vebrores EP Mortar

5.0–50.0 mm

High-strength, trowel-applied epoxy resin mortar designed to dissipate moisture pressure and for permanent repairs to concrete surfaces prior to the installation of polymer flooring systems.

High strength for permanent repairs

Dissipates rising moisture

Easily applied with a trowel

thickness

5.0–50.0 mm

FeRFA type

N/A

temperature resistance

finish

Natural

system design

primer

vebro EP Primer

0.25 kg/m²

mortar

vebro EP Mortar

10.00 kg/m²

grout

vebro EP WB Primer

0.40 kg/m²

technical properties

Thickness	–	5.0 – 50.0 mm
Finish	–	Natural
Compressive Strength DIN EN 196 / ASTM C 109	DIN EN 196 / ASTM C 109	>80 N/mm²
Adhesive Strength DIN ISO 4624	DIN ISO 4624	>2.5 N/mm²
Flexural Strength DIN EN 196 / ASTM C 109	DIN EN 196 / ASTM C 109	>20 N/mm²
Speed of Cure (at 25°C)	–	Light Foot Traffic – 24 hours Full Chemical Cure – 7 days
Chemical Resistance	–	Resistant to a very wide range of chemicals. For a full chemical resistance breakdown contact our Technical Services team.

Please note: The typical physical properties given above are derived from testing in a controlled laboratory environment at 20°C unless otherwise specified. Results derived from testing field applied samples may vary dependent upon site conditions. The slip resistance figures given above are affected by application techniques and prevailing site conditions. Slip resistance can reduce over time due to poor maintenance, general wear or surface contaminants. Good housekeeping practices should be observed. For a full technical profile, please refer to the data sheet for each product in the system design.

standard colours

application suitability

Industrial & manufacturing
Warehousing & logistics
Food & beverage

don't see your specific area listed?

We don’t have room to list every area where vebrores EP Mortar is suitable for installation.

Our team will be happy to discuss your project to ensure the most appropriate solution.

relevant downloads

vebrores EP Mortar [EN-Asia] Industrial Polymer Systems Flooring Guide Pharmaceutical Flooring Guide

request a quote

We’d love to work with you on your project. Please complete the details below, and we’ll be in touch with a quote for vebrores EP Mortar.

need help specifying the right system?

Our Technical Sales team are on hand to offer specification insight, site support and technical insight throughout your resin flooring project.

where in the world?

Not seeing local content?

Vebro Polymers has manufacturing and office headquarters in Manchester, UK and Kuala Lumpur, Malaysia, as well as a number of distribution partners. Please choose your nearest Vebro HQ or distribution location to see local content.