+44 (0) 1618 738 396 Drop us a line
hello@vebropolymers.com Email the team
Argyle House, Wilmslow Drop in to see us

Home > vebrocrete (pf)™ > vebrocrete ESD MF (pf)

vebrocrete ESD MF (pf)

3.0–4.0 mm

Medium duty, easily-applied, self smoothing, PU concrete for areas where ESD protection is critical.

High temperature resistance up to 70°C

Excellent resistance to corrosive foodstuffs & aggressive cleaning solvents

Excellent cleanability & complies with HACCP food safety management guidelines

Free from phthalates and other LBC Red List “worst-in-class” materials

thickness

3.0–4.0 mm

FeRFA type

Type 7

temperature resistance

5 – 70°C at 3.0 mm

finish

Smooth

system design

primer

vebro EP Primer

0.25 kg/m²

vebrocrete PU MF (pf) (unpigmented)

1.90 kg/m²

copper tape

Copper Tape

esd primer

vebro ESD Primer

0.10 kg/m²

topping

vebrocrete PU ESD MF (pf)

5.70 kg/m²

technical properties

System Thickness	–	3.0 – 4.0 mm
FeRFA Type BS 8204-6	BS 8204-6	Type 7
Temperature Resistance	–	5 – 70°C at 3.0 mm
Fire Resistance EN 13501-1	EN 13501-1	Bfl-s1
Conductivity EN 61340-4-1	EN 61340-4-1	<10⁹ Ω
Co-efficient of Thermal Expansion ASTM C531	ASTM C531	5.8 × 10⁻⁵ °C
Slip Resistance TRLL Pendulum Slip Test / DIN 51130	TRLL Pendulum Slip Test / DIN 51130	Dry >70, Wet >21 R9
Abrasion Resistance EN 13892-4 / BS 8204-2	EN 13892-4 / BS 8204-2	AR 0.5 Special Class
Shore D Hardness	–	80 after 28 days
Compressive Strength EN 196-1 / ASTM C109	EN 196-1 / ASTM C109	50 N/mm²
Speed of Cure (at 20°C)	–	Light Foot Traffic – 12 hours Full Chemical Cure – 7 days

Please note: The typical physical properties given above are derived from testing in a controlled laboratory environment at 20°C unless otherwise specified. Results derived from testing field applied samples may vary dependent upon site conditions. The slip resistance figures given above are affected by application techniques and prevailing site conditions. Slip resistance can reduce over time due to poor maintenance, general wear or surface contaminants. Good housekeeping practices should be observed. For a full technical profile, please refer to the data sheet for each product in the system design.

standard colours

application suitability

Industrial & manufacturing
Pharmaceutical
Chemical & solvent storage
Server rooms
Dispensaries
Loading bays
Maintenance areas
Packaging & finishing
Plant rooms
Warehousing

don't see your specific area listed?

We don’t have room to list every area where vebrocrete ESD MF (pf) is suitable for installation.

Our team will be happy to discuss your project to ensure the most appropriate solution.

relevant downloads

request a quote

We’d love to work with you on your project. Please complete the details below, and we’ll be in touch with a quote for vebrocrete ESD MF (pf).

need help specifying the right system?

Our Technical Sales team are on hand to offer specification insight, site support and technical insight throughout your resin flooring project.

where in the world?

Not seeing local content?

Vebro Polymers has manufacturing and office headquarters in Manchester, UK and Kuala Lumpur, Malaysia, as well as a number of distribution partners. Please choose your nearest Vebro HQ or distribution location to see local content.