vebrores EP SL1
Solvent-free self-smoothing epoxy system for medium to heavy-duty industrial areas.
thickness
FeRFA type
temperature resistance
finish
system design
technical properties
| Thickness | – | 1.0 mm |
| Finish | – | Coloured Gloss |
| FeRFA Type BS 8204-6 | BS 8204-6 | Type 5 |
| Compressive Strength ASTM D645 | ASTM D645 | 62 N/mm² |
| Flexural Strength ASTM D645 | ASTM D645 | 38 N/mm² |
| Speed of Cure (at 20°C) | – |
Light Foot Traffic – 18 hours Light Wheeled Traffic – 24 hours Heavy Duty Traffic – 72 hours Full Chemical Cure – 7 days |
| Chemical Resistance | – | Resistant to a very wide range of chemicals. For a full chemical resistance breakdown contact our Technical Services team. |
Please note: The typical physical properties given above are derived from testing in a controlled laboratory environment at 20°C unless otherwise specified. Results derived from testing field applied samples may vary dependent upon site conditions. The slip resistance figures given above are affected by application techniques and prevailing site conditions. Slip resistance can reduce over time due to poor maintenance, general wear or surface contaminants. Good housekeeping practices should be observed. For a full technical profile, please refer to the data sheet for each product in the system design.
standard colours
application suitability
- Industrial & manufacturing
- Warehousing & logistics
- Print shops
don't see your specific area listed?
Our team will be happy to discuss your project to ensure the most appropriate solution.
relevant downloads
request a quote
Thanks for requesting a quote!
One of our Sales Team will be in touch soon with your project quote. If they have any questions, they'll either call or email.
need help specifying the right system?
Our Technical Sales team are on hand to offer specification insight, site support and technical insight throughout your resin flooring project.