Home > vebrospeed > vebrospeed Flake

vebrospeed Flake

2.0–4.0 mm

A highly durable and decorative, UV-stable flake flooring system based on fast-cure MMA (methyl methacrylate) technology.

Highly decorative finish, available in a range of colourful flake blends
Traffic in 1 hour, offers clients a fast return to service
Allows early access to follow-on trades
Excellent chemical and stain resistance
Download system data sheet
Talk to the Vebro team
Compare systems
thickness
2.0–4.0 mm
FeRFA type
Type 4
temperature resistance
Sustained: 50°C
finish
Decorative flake, matt

system design

1
primer
vebro MMA Primer
0.50 kg/m²
2
scatter
vebro Natural Quartz
0.30 kg/m²
3
bodycoat
vebro MMA Binder
0.80 kg/m² (2.0 mm)
1.50 kg/m² (4.0 mm)
vebro MMA Pigment
0.02 kg/m² (2.0 mm)
0.04 kg/m² (4.0 mm)
vebro MMA Filler
1.50 kg/m² (2.0 mm)
3.00 kg/m² (4.0 mm)
4
flake broadcast
vebro Coloured Flake Blends
0.75 kg/m²
5
sealer
vebro MMA Seal
0.30–0.50 kg/m²
Talk to the Vebro team
Download system data sheet
Compare systems
Talk to the Vebro team
Download system data sheet
Compare systems

technical properties

System Thickness – 2.0–4.0 mm
FeRFA Type BS 8204-6 BS 8204-6 Type 4
Finish – Decorative Flake Matt
Reaction to Fire EN 13501-1 EN 13501-1 Cfl-s1
Temperature Resistance EN 1062-3 EN 1062-3 Sustained: 50°C
Slip Resistance BS 7976–2 (4–S Rubber Slider) BS 7976–2 (4–S Rubber Slider) Dry: Low slip potential >40
Wet: Good slip resistance <40
Anti-Skid Properties BGR 181 / DIN 51130 BGR 181 / DIN 51130 Class R9
Water Permeability Karsten Test Karsten Test Nil
Impact Strength EN ISO 6272 EN ISO 6272 10 N/m
Bond Strength EN 13892-8 EN 13892-8 > 2.5 N/mm²
Chemical Resistance – Resistant to a very wide range of chemicals.
Speed of Cure – Light Foot Traffic: 1 hour
Full Chemical Cure: 2–3 hours
VOC Content – <8 g/l

Please note: The typical physical properties given above are derived from testing in a controlled laboratory environment at 20°C unless otherwise specified. Results derived from testing field applied samples may vary dependent upon site conditions. The slip resistance figures given above are affected by application techniques and prevailing site conditions. Slip resistance can reduce over time due to poor maintenance, general wear or surface contaminants. Good housekeeping practices should be observed. For a full technical profile, please refer to the data sheet for each product in the system design.

standard colours

Black Magic
Blue Lagoon
Cuba Libre
Dark & Stormy
Dirty Martini
Espresso Martini
Long Island Iced Tea
Lotus Martini
Tom Collins
White Russian

application suitability

  • Commercial venues
  • Retail & concessions
  • Corridors & walkways
  • Entrances & exits

don't see your specific area listed?

We don’t have room to list every area where vebrospeed Flake is suitable for installation.

Our team will be happy to discuss your project to ensure the most appropriate solution.

Talk to the Vebro team

relevant downloads

request a quote

We’d love to work with you on your project. Please complete the details below, and we’ll be in touch with a quote for vebrospeed Flake.

need help specifying the right system?

Our Technical Sales team are on hand to offer specification insight, site support and technical insight throughout your resin flooring project.

Talk to the Vebro team
© 2026 Vebro Group. All rights reserved.

where in the world?

Not seeing local content?

Vebro Polymers has manufacturing and office headquarters in Manchester, UK and Kuala Lumpur, Malaysia, as well as a number of distribution partners. Please choose your nearest Vebro HQ or distribution location to see local content.

x