+44 (0) 1618 738 396 Drop us a line
hello@vebropolymers.com Email the team
Argyle House, Wilmslow Drop in to see us

Home > vebrostatic > vebrostatic EP ESD Nano SL

vebrostatic EP ESD Nano SL

1.0 mm

A next-generation, static conductive epoxy flooring system harnessing the advanced performance of single-walled carbon nanotube (SWCNT) technology.

Meets EN 1081 Conductive, EN 61340-4-1

Nanotube technology creates a highly effective conductive network throughout the coating

Prevents fire and explosion risk from electrostatic charge

Excellent resistance to fuels, lubricants, solvents and other chemicals

thickness

1.0 mm

FeRFA type

Type 5

temperature resistance

finish

Smooth, gloss

system design

primer

vebro EP Primer (nf)

0.25 kg/m²

copper tape

Copper Tape

esd primer

vebro EP ESD Primer (ep)

0.1 kg/m²

coating

vebro EP ESD Nano SL

1.8 kg/m²

technical properties

System Thickness	–	1.0 mm
FeRFA Type BS 82046	BS 82046	Type 5
Finish	–	Smooth, gloss
Compressive Strength EN 196 / ASTM C109	EN 196 / ASTM C109	70 N/mm²
Flexural Strength EN 196 / ASTM C109	EN 196 / ASTM C109	40 N/mm²
Conductivity EN 1081	EN 1081	<10⁶ Ω
Conductivity EN 61340-4-1	EN 61340-4-1	<10⁹ Ω
Chemical Resistance	–	Resistant to a wide range of chemicals.
Speed of Cure (at 20°C)	–	Light Foot Traffic – 18 hours Full Chemical Cure – 7 days
Shore D Hardness EN ISO 868	EN ISO 868	82 after 28 days
Adhesive Strength EN ISO 4624	EN ISO 4624	> 2.5 N/mm2
Impact Resistance EN 13813	EN 13813	≥ 4 Nm (IR4)
Wear Resistance Taber EN ISP 5470-1	Taber EN ISP 5470-1	> 55 mg
Fire Resistance DIN EN 13501-1	DIN EN 13501-1	Bfl-S1

Please note: The typical physical properties given above are derived from testing in a controlled laboratory environment at 20°C unless otherwise specified. Results derived from testing field applied samples may vary dependent upon site conditions. The slip resistance figures given above are affected by application techniques and prevailing site conditions. Slip resistance can reduce over time due to poor maintenance, general wear or surface contaminants. Good housekeeping practices should be observed. For a full technical profile, please refer to the data sheet for each product in the system design.

standard colours

RAL 7037 Dusty Grey

RAL 7035 Light Grey

RAL 3009 Oxide Red

RAL 6010 Grass Green

RAL 7011 Iron Grey

RAL 7040 Window Grey

application suitability

Data centres
Server rooms
Laboratories
Industrial & manufacturing

don't see your specific area listed?

We don’t have room to list every area where vebrostatic EP ESD Nano SL is suitable for installation.

Our team will be happy to discuss your project to ensure the most appropriate solution.

relevant downloads

Cleaning & Maintenance Guide Industrial Polymer Systems Flooring Guide Pharmaceutical Flooring Guide The Little Book of Vebro vebro EP ESD Primer [EN-ASIA] vebro EP ESD SL [EN-ASIA] vebro EP Primer [EN-ASIA] vebrostatic EP ESD Nano SL [EN-Asia]

request a quote

We’d love to work with you on your project. Please complete the details below, and we’ll be in touch with a quote for vebrostatic EP ESD Nano SL.

need help specifying the right system?

Our Technical Sales team are on hand to offer specification insight, site support and technical insight throughout your resin flooring project.

where in the world?

Not seeing local content?

Vebro Polymers has manufacturing and office headquarters in Manchester, UK and Kuala Lumpur, Malaysia, as well as a number of distribution partners. Please choose your nearest Vebro HQ or distribution location to see local content.