+44 (0) 1618 738 396 Drop us a line
hello@vebropolymers.com Email the team
Argyle House, Wilmslow Drop in to see us

Home > vebroflex > vebroflex Comfort VA

vebroflex Comfort VA

0.3–1.5 mm

A seamless, flexible, PU comfort resin wall coating system with a pigmented UV seal coat.

Creates a seamless floor-to-wall finish

Absorbs impact sound by up to 5 dB

AgBB certified as low emissions

thickness

0.3–1.5 mm

FeRFA type

N/A

temperature resistance

finish

Smooth, matt

system design

primer

vebro EP WB Primer

0.25 kg/m²

levelling

vebro PU VA

0.80–1.00 kg/m²

levelling

vebro Natural Quartz

0.08–0.10 kg/m²

fine levelling

vebro PU VA

0.30–0.50 kg/m²

sealer

vebroflex PU UV WB Seal (Matt)

1st coat: 0.11 kg/m²

2nd coat: 0.11 kg/m²

Please note: levelling & fine levelling is optional

technical properties

System Thickness	–	0.3–1.5 mm
Tensile Strength	DIN 53504	approx. 7 N/mm²
Elongation at Break	DIN 53504	approx. 90%
Shore Hardness	EN ISO 868	Shore A 80 (after 28 days)
Classification	EN 685	Private Buildings: 23 Public Buildings: 34
Impact Sound Absorption	DIN 4109	Up to 5 dB
Wear Resistance	EN ISO 5470-1 / ASTM D 1044	≤ 40 mg
Impact Strength	EN 13813	≥ 4 Nm (IR4)
Fire Resistance	EN 13501-1	Bfl-s1
Adhesive Strength	DIN ISO 4624	> 1.5 N/mm²

Please note: The typical physical properties given above are derived from testing in a controlled laboratory environment at 20°C unless otherwise specified. Results derived from testing field applied samples may vary dependent upon site conditions. The slip resistance figures given above are affected by application techniques and prevailing site conditions. Slip resistance can reduce over time due to poor maintenance, general wear or surface contaminants. Good housekeeping practices should be observed. For a full technical profile, please refer to the data sheet for each product in the system design.

standard colours

RAL 1001 Beige

RAL 1003 Signal Yellow

RAL 1011 Brown Beige

RAL 1013 Oyster White

RAL 2000 Yellow Orange

RAL 3015 Light Pink

RAL 4002 Red Violet

RAL 5003 Sapphire Blue

RAL 5019 Capri Blue

RAL 5024 Pastel Blue

RAL 6011 Reseda Green

RAL 6019 Pastel Green

RAL 6034 Pastel Turquoise

RAL 7021 Black Grey

RAL 7023 Concrete Grey

RAL 7024 Graphite Grey

RAL 7035 Light Grey

RAL 7037 Dusty Grey

RAL 7038 Agate Grey

RAL 9017 Traffic Black

application suitability

Commercial venues
Corridors & walkways
Lobbies & reception
Waiting areas

don't see your specific area listed?

We don’t have room to list every area where vebroflex Comfort VA is suitable for installation.

Our team will be happy to discuss your project to ensure the most appropriate solution.

relevant downloads

vebro EP WB Primer [EN-UK] vebro Natural Quartz [EN-UK] vebroflex Comfort VA [EN-UK] vebroflex PU UV WB Seal Clear Matt [EN-UK] vebroflex PU UV WB Seal Matt [EN-UK] Cleaning & Maintenance Guide Flexible & Shared Workspace Flooring Guide Industrial Polymer Systems by FeRFA Category Flooring Guide Pharmaceutical Flooring Guide Polymer Flooring for Hotels & Resorts Polymer Flooring Systems for Stadiums & Arenas vebro Materials & Sustainability vebro Specification Method vebroflex Range Overview Wedding Cake, Waddesdon

request a quote

We’d love to work with you on your project. Please complete the details below, and we’ll be in touch with a quote for vebroflex Comfort VA.

need help specifying the right system?

Our Technical Sales team are on hand to offer specification insight, site support and technical insight throughout your resin flooring project.

where in the world?

Not seeing local content?

Vebro Polymers has manufacturing and office headquarters in Manchester, UK and Kuala Lumpur, Malaysia, as well as a number of distribution partners. Please choose your nearest Vebro HQ or distribution location to see local content.