+44 (0) 1618 738 396 Drop us a line
hello@vebropolymers.com Email the team
Argyle House, Wilmslow Drop in to see us

Home > vebrodeck > vebrodeck PU ID PB

vebrodeck PU ID PB

0.5 mm

Polyurethane coating for parking bays in internal parking decks.

Suited to parking bays in internal parking decks

Available in a wide range of colours to regulate vehicle and pedestrian movement

Resistant to heavy foot & wheeled traffic

Excellent resistance to oils & petrol

thickness

0.5 mm

FeRFA type

N/A

temperature resistance

finish

Lightly textured, gloss

system design

primer

vebrodeck PU BC

0.30 kg/m²

coating

vebrodeck PU TC

0.30 kg/m²

scatter

40 – 80s mesh sand

0.05 kg/m²

seal

vebro PU UV Seal (Gloss)

0.12 kg/m²

vebro PU UV WB Seal (Gloss)

0.12 kg/m²

Please note: Optional scatter.

technical properties

Speed of Cure (at 25°C)	–	Light Foot Traffic – 18–36 hours Full Chemical Cure – 28 days
Abrasion Resistance EN 13892-4 / BS 8204-2	EN 13892-4 / BS 8204-2	AR 0.5 Special Class
Abrasion Resistance EN ISO 5470-1	EN ISO 5470-1	1.9 mg/1000 U (≤ 3.000)
Impact Resistance EN ISO 6772-2	EN ISO 6772-2	4 Nm (no cracks)
Chemical Resistance	–	Resistant to a very wide range of chemicals. For a full chemical resistance breakdown contact our Technical Services team.
Adhesion EN ISO 4624	EN ISO 4624	>1.5 N/mm² (concrete failure)
Fire Resistance EN ISO 13501	EN ISO 13501	Bfl-s1
Water Vapour Permeability EN ISO 7783-2	EN ISO 7783-2	Class III >200 m
Water Absorption EN 1062-3	EN 1062-3	<0.01 kg/m² × h0.5

Please note: The typical physical properties given above are derived from testing in a controlled laboratory environment at 20°C unless otherwise specified. Results derived from testing field applied samples may vary dependent upon site conditions. The slip resistance figures given above are affected by application techniques and prevailing site conditions. Slip resistance can reduce over time due to poor maintenance, general wear or surface contaminants. Good housekeeping practices should be observed. For a full technical profile, please refer to the data sheet for each product in the system design.

standard colours

RAL 3015 Light Pink

RAL 5017 Traffic Blue

RAL 7037 Dusty Grey

RAL 7035 Light Grey

RAL 3009 Oxide Red

RAL 6010 Grass Green

application suitability

Multi-storey car parks
Intermediate parking decks
Parking bays

don't see your specific area listed?

We don’t have room to list every area where vebrodeck PU ID PB is suitable for installation.

Our team will be happy to discuss your project to ensure the most appropriate solution.

relevant downloads

vebro PU UV Seal (Gloss) [EN-ASIA] vebro PU UV WB Seal (Gloss) [EN-ASIA] vebrodeck PU BC [EN-ASIA] vebrodeck PU ID PB [EN-Asia] vebrodeck PU TC [EN-ASIA] Project Showcase – vebrodeck at Alice Smith International School Project Showcase – vebrodeck MMA ED at Ram Mill Business Centre Project Showcase – vedrodeck ID at Heron Tower vebrodeck at South Western Railway, UK vebrodeck Car Park Deck Coating Systems Overview Guide vebrodeck ID at Cordwallis Group, Bicester – Vebro Polymers

request a quote

We’d love to work with you on your project. Please complete the details below, and we’ll be in touch with a quote for vebrodeck PU ID PB.

need help specifying the right system?

Our Technical Sales team are on hand to offer specification insight, site support and technical insight throughout your resin flooring project.

where in the world?

Not seeing local content?

Vebro Polymers has manufacturing and office headquarters in Manchester, UK and Kuala Lumpur, Malaysia, as well as a number of distribution partners. Please choose your nearest Vebro HQ or distribution location to see local content.