Home > vebroflex > vebroflex Comfort UV Plus

vebroflex Comfort UV Plus

2.0–3.0 mm

A seamless, flexible, PU comfort resin system with a UV seal coat.

Cushioning effect provides high levels of comfort & absorbs impact sound by up to 5 dB
Reduces heat loss in multi-occupancy spaces & suitable for use with underfloor heating
AgBB certified as low emissions
Abrasion resistant, suitable for chair castors
Download system data sheet
Talk to the Vebro team
Compare systems
thickness
2.0–3.0 mm
FeRFA type
Type 5
temperature resistance
finish
Smooth, matt

system design

1
primer
vebro EP Primer
0.40 kg/m²
2
broadcast
vebro Natural Quartz 0.3–0.8 mm
0.50 kg/m²
3
coating
vebroflex PU SL UV Plus
2.50 kg/m² (2.0 mm)
3.75 kg/m² (3.0 mm)
4
sealer
vebroflex PU UV WB Seal (Matt or Clear Matt)
0.11 kg/m²
Please note: vebro EP DPM may be used as a primer where substrate moisture content is >75% RH.
Talk to the Vebro team
Download system data sheet
Compare systems
Talk to the Vebro team
Download system data sheet
Compare systems

technical properties

System Thickness – 2.0–3.0 mm
FeRFA Type BS 8204-6 Type 5
Tensile Strength DIN 53504 approx. 9 N/mm²
Elongation at Break DIN 53504 approx. 60%
Tear Resistance DIN 53515 approx. 12 N/mm²
Shore Hardness EN ISO 868 Shore A 80 (after 28 days)
Classification EN 685 Private Buildings: 23
Public Buildings: 34
Impact Sound Absorption DIN 4109 Up to 5 dB
Wear Resistance EN ISO 5470-1 / ASTM D 1044 ≤ 80 mg
Impact Strength EN 13813 ≥ 4 Nm (IR4)
Slip Resistance BGR 181 / DIN 51130 / EN 13036-4 Class R9 (Wet)
>40 (Dry)
Fire Resistance EN 13501-1 Bfl-s1

Please note: The typical physical properties given above are derived from testing in a controlled laboratory environment at 20°C unless otherwise specified. Results derived from testing field applied samples may vary dependent upon site conditions. The slip resistance figures given above are affected by application techniques and prevailing site conditions. Slip resistance can reduce over time due to poor maintenance, general wear or surface contaminants. Good housekeeping practices should be observed. For a full technical profile, please refer to the data sheet for each product in the system design.

standard colours

RAL 1001 Beige
RAL 1003 Signal Yellow
RAL 1011 Brown Beige
RAL 1013 Oyster White
RAL 2000 Yellow Orange
RAL 3015 Light Pink
RAL 4002 Red Violet
RAL 5003 Sapphire Blue
RAL 5019 Capri Blue
RAL 5024 Pastel Blue
RAL 6011 Reseda Green
RAL 6019 Pastel Green
RAL 6034 Pastel Turquoise
RAL 7021 Black Grey
RAL 7023 Concrete Grey
RAL 7024 Graphite Grey
RAL 7035 Light Grey
RAL 7037 Dusty Grey
RAL 7038 Agate Grey
RAL 9017 Traffic Black

application suitability

  • Commercial venues
  • Corridors & walkways
  • Offices
  • Lobbies & reception

don't see your specific area listed?

We don’t have room to list every area where vebroflex Comfort UV Plus is suitable for installation.

Our team will be happy to discuss your project to ensure the most appropriate solution.

Talk to the Vebro team

relevant downloads

request a quote

We’d love to work with you on your project. Please complete the details below, and we’ll be in touch with a quote for vebroflex Comfort UV Plus.

need help specifying the right system?

Our Technical Sales team are on hand to offer specification insight, site support and technical insight throughout your resin flooring project.

Talk to the Vebro team
© 2026 Vebro Group. All rights reserved.

where in the world?

Not seeing local content?

Vebro Polymers has manufacturing and office headquarters in Manchester, UK and Kuala Lumpur, Malaysia, as well as a number of distribution partners. Please choose your nearest Vebro HQ or distribution location to see local content.

x