+44 (0) 1618 738 396 Drop us a line
hello@vebropolymers.com Email the team
Argyle House, Wilmslow Drop in to see us

Home > vebroflex > vebroflex Decorative UV Plus

vebroflex Decorative UV Plus

2.0–3.0 mm

A seamless, decorative, PU comfort resin system with a clear UV seal coat for enhanced colour stability.

Decorative speckled comfort finish that absorbs impact sound by up to 5 dB

Reduces heat loss in multi-occupancy spaces & suitable for use with underfloor heating

AgBB certified as low emissions

Abrasion resistant, suitable for chair castors

thickness

2.0–3.0 mm

FeRFA type

Type 5

temperature resistance

finish

Decorative, clear matt

system design

primer

vebro EP Primer

0.40 kg/m²

broadcast

vebro Natural Quartz 0.3–0.8 mm

0.50 kg/m²

coating

vebroflex PU SL Decorative

2.50 kg/m² (2.0 mm)

3.75 kg/m² (3.0 mm)

sealer

vebroflex PU UV WB Seal (Clear Matt)

0.11 kg/m²

Please note: vebro EP DPM may be used as a primer where substrate moisture content is >75% RH.

technical properties

System Thickness	–	2.0–3.0 mm
FeRFA Type	BS 8204-6	Type 5
Tensile Strength	DIN 53504	approx. 9 N/mm²
Elongation at Break	DIN 53504	approx. 60%
Tear Resistance	DIN 53515	approx. 12 N/mm²
Shore Hardness	EN ISO 868	Shore A 80 (after 28 days)
Classification	EN 685	Private Buildings: 23 Public Buildings: 34
Impact Sound Absorption	DIN 4109	Up to 5 dB
Wear Resistance	EN ISO 5470-1 / ASTM D 1044	≤ 80 mg
Impact Strength	EN 13813	≥ 4 Nm (IR4)
Slip Resistance	BGR 181 / DIN 51130 / EN 13036-4	Class R9 (Wet) >40 (Dry)
Fire Resistance	EN 13501-1	Bfl-s1

Please note: The typical physical properties given above are derived from testing in a controlled laboratory environment at 20°C unless otherwise specified. Results derived from testing field applied samples may vary dependent upon site conditions. The slip resistance figures given above are affected by application techniques and prevailing site conditions. Slip resistance can reduce over time due to poor maintenance, general wear or surface contaminants. Good housekeeping practices should be observed. For a full technical profile, please refer to the data sheet for each product in the system design.

standard colours

Arctic White

Charcoal Grey

Citrus Orange

Deep Blue

Deep Teal

Duck Egg Blue

Midnight Black

Pearl White

Sage Green

Sea Blue

Steel Grey

Sunshine Yellow

application suitability

Commercial venues
Retail & concessions
Lobbies & reception
Design studios

don't see your specific area listed?

We don’t have room to list every area where vebroflex Decorative UV Plus is suitable for installation.

Our team will be happy to discuss your project to ensure the most appropriate solution.

relevant downloads

vebro EP Primer [EN-UK] vebro Natural Quartz [EN-UK] vebroflex Decorative UV Plus [EN-UK] vebroflex PU SL Decorative [EN-UK] vebroflex PU UV WB Seal Clear Matt [EN-UK] vebroflex PU UV WB Seal Matt [EN-UK] Cleaning & Maintenance Guide Flexible & Shared Workspace Flooring Guide Industrial Polymer Systems by FeRFA Category Flooring Guide Pharmaceutical Flooring Guide Polymer Flooring for Hotels & Resorts Polymer Flooring Systems for Stadiums & Arenas vebro Materials & Sustainability vebro Specification Method vebroflex Range Overview Wedding Cake, Waddesdon

request a quote

We’d love to work with you on your project. Please complete the details below, and we’ll be in touch with a quote for vebroflex Decorative UV Plus.

need help specifying the right system?

Our Technical Sales team are on hand to offer specification insight, site support and technical insight throughout your resin flooring project.

where in the world?

Not seeing local content?

Vebro Polymers has manufacturing and office headquarters in Manchester, UK and Kuala Lumpur, Malaysia, as well as a number of distribution partners. Please choose your nearest Vebro HQ or distribution location to see local content.