+44 (0) 1618 738 396 Drop us a line
hello@vebropolymers.com Email the team
Argyle House, Wilmslow Drop in to see us

Home > vebrores > vebrores EP SL

vebrores EP SL

2.0–4.0 mm

A solvent-free, easily-applied, self-smoothing epoxy flooring system, offering outstanding strength and performance.

Excellent wear resistance to medium to heavy duty foot and rubber wheeled traffic

Smooth high gloss finish

Excellent chemical resistance profile

Easy to clean, non-tainting and non-dusting finish

thickness

2.0–4.0 mm

FeRFA type

Type 5

temperature resistance

Up to 70°C continuous

finish

Smooth, gloss

system design

primer

vebro EP Primer

0.50 kg/m²

coating

vebro EP SL

3.60 kg/m² (2.0 mm)

5.40 kg/m² (3.0 mm)

7.20 kg/m² (4.0 mm)

Please note: second prime optional

technical properties

System Thickness	–	2.0–4.0 mm
FeRFA Type	–	Type 5
Temperature Resistance	–	Up to 70°C continuous
Compressive Strength	EN 13892-2	>50 N/mm²
Flexural Strength	EN 13892-2	>30 N/mm²
Tensile Strength	BS 6319-7	25 N/mm²
Bond Strength	EN 13892-8	2.5 N/mm²
Shore D Hardness	EN ISO 868	>50 after 7 days
Impact Resistance	EN ISO 6272	>10 Nm
Reaction to Fire	EN 13501-1	Meets Bfl-s1
Chemical Resistance	–	Resistant to a wide range of chemicals, please contact Vebro Polymers for further details.
Slip Resistance	BS 7976-2	Dry: >36 PTV Wet: specify a slip-resistant alternative
Finish	–	Smooth, gloss

Please note: The typical physical properties given above are derived from testing in a controlled laboratory environment at 20°C unless otherwise specified. Results derived from testing field applied samples may vary dependent upon site conditions. The slip resistance figures given above are affected by application techniques and prevailing site conditions. Slip resistance can reduce over time due to poor maintenance, general wear or surface contaminants. Good housekeeping practices should be observed. For a full technical profile, please refer to the data sheet for each product in the system design.

standard colours

Glorious Greys BS 00a05 Light Grey

Glorious Greys BS 00a09 Flint Grey

Glorious Greys RAL 7001 Silver Grey

Glorious Greys RAL 7004 Signal Grey

Glorious Greys RAL 7024 Graphite Grey

Glorious Greys RAL 7037 Dusty Grey

Glorious Greys RAL 7038 Agate Grey

Glorious Greys RAL 7040 Window Grey

Glorious Greys RAL 7046 Telegrey 2

Brilliant Brights BS 00e05 White

Brilliant Brights BS 00e53 Black

Brilliant Brights RAL 1003 Signal Yellow

Brilliant Brights RAL 3001 Signal Red

Brilliant Brights RAL 5015 Sky Blue

Brilliant Brights RAL 5017 Traffic Blue

Brilliant Brights RAL 6024 Traffic Green

Brilliant Brights RAL 7011 Iron Grey

Brilliant Brights RAL 7031 Blue Grey

application suitability

Industrial & manufacturing
Warehousing
Production & processing
Maintenance areas

don't see your specific area listed?

We don’t have room to list every area where vebrores EP SL is suitable for installation.

Our team will be happy to discuss your project to ensure the most appropriate solution.

relevant downloads

vebro EP Primer [EN-UK] vebro EP SL [EN-UK] vebrores EP SL [EN-UK] Data Centres Flooring Guide Industrial Polymer Systems by FeRFA Category Flooring Guide Pharmaceutical Flooring Guide Polymer Flooring for Hotels & Resorts Polymer Flooring for Textiles Processing & Manufacturing Polymer Flooring Systems for Print Shops Polymer Flooring Systems for Self Storage Facilities Polymer Flooring Systems for Stadiums & Arenas

request a quote

We’d love to work with you on your project. Please complete the details below, and we’ll be in touch with a quote for vebrores EP SL.

need help specifying the right system?

Our Technical Sales team are on hand to offer specification insight, site support and technical insight throughout your resin flooring project.

where in the world?

Not seeing local content?

Vebro Polymers has manufacturing and office headquarters in Manchester, UK and Kuala Lumpur, Malaysia, as well as a number of distribution partners. Please choose your nearest Vebro HQ or distribution location to see local content.