+44 (0) 1618 738 396 Drop us a line
hello@vebropolymers.com Email the team
Argyle House, Wilmslow Drop in to see us

Home > vebrospeed > vebrospeed MMA RS

vebrospeed MMA RS

2.0–4.0 mm

A high performance deck wearing system, for use in heavy duty industrial facilities.

Heavy duty against sustained traffic & plant machinery

Protects against industrial chemical attack

thickness

2.0–4.0 mm

FeRFA type

Type 4

temperature resistance

0°C–60°C (>80°C for intermittent periods)

finish

Smooth, gloss

system design

primer

vebro MMA Damp Primer

0.40 kg/m²

bodycoat

vebro MMA Binder RS

1.70 kg/m²

vebro MMA Filler RS

3.40 kg/m²

vebro MMA Pigment

0.10 kg/m²

sealer

vebro MMA Topcoat RS

0.50 kg/m² per coat

technical properties

System Thickness	–	2.0–4.0 mm
Adhesion EN 1542 (Pull Off Test)	EN 1542 (Pull Off Test)	≥ 2.0 N/mm²
Water Absorption EN 1062-3	EN 1062-3	<0.01 kg/m² × h^0.5 (<0.1)
Abrasion Resistance EN ISO 5470–1	EN ISO 5470–1	1.9 mg 1000 U (≤3.000)
Impact Resistance EN ISO 6272-1	EN ISO 6272-1	4 Nm, no cracks
Chemical Resistance	–	Resistant to a very wide range of aggressive chemicals.
Fire Resistance EN ISO 13501	EN ISO 13501	Cfl-s1
Water Vapour Permeability EN ISO 7783–2	EN ISO 7783–2	Class III
Temperature Resistance	–	0°C–60°C >80°C for intermittent periods
Speed of Cure	–	Light foot traffic: 45 minutes Full chemical cure: 90 minutes

Please note: The typical physical properties given above are derived from testing in a controlled laboratory environment at 20°C unless otherwise specified. Results derived from testing field applied samples may vary dependent upon site conditions. The slip resistance figures given above are affected by application techniques and prevailing site conditions. Slip resistance can reduce over time due to poor maintenance, general wear or surface contaminants. Good housekeeping practices should be observed. For a full technical profile, please refer to the data sheet for each product in the system design.

standard colours

RAL 1023 Traffic Yellow

RAL 3020 Traffic Red

RAL 5017 Traffic Blue

RAL 6024 Traffic Green

RAL 7037 Dusty Grey

RAL 7042 Traffic Grey A

RAL 9003 Signal White

RAL 9017 Traffic Black

application suitability

Industrial & manufacturing
Production & processing
Workshops
Warehousing

don't see your specific area listed?

We don’t have room to list every area where vebrospeed MMA RS is suitable for installation.

Our team will be happy to discuss your project to ensure the most appropriate solution.

relevant downloads

vebro MMA Damp Primer [EN-UK]

request a quote

We’d love to work with you on your project. Please complete the details below, and we’ll be in touch with a quote for vebrospeed MMA RS.

need help specifying the right system?

Our Technical Sales team are on hand to offer specification insight, site support and technical insight throughout your resin flooring project.

where in the world?

Not seeing local content?

Vebro Polymers has manufacturing and office headquarters in Manchester, UK and Kuala Lumpur, Malaysia, as well as a number of distribution partners. Please choose your nearest Vebro HQ or distribution location to see local content.